VARILIGHT® Technical Support
V-Pro Dimmers - Selecting DigiFlux Mode for Dimmable CFLs
Changing the driving mode for CFLs
1. Switch on and set the dimmer knob to the MAXIMUM position (turn fully clockwise).
2. Turn the lights off and back on again. OFF – ON. Wait until the lights reach full brightness.
3. Repeat step 2 at least twice more. OFF – ON – OFF – ON, waiting until the lights reach full brightness each time they are switched on.
4. The lights will step up and down in brightness to show that the dimmer is in CONFIGURATION MODE, then go off.
5. Turn the knob fully anti-clockwise, fully clockwise, fully anti-clockwise, fully clockwise. The dimmer will change the mode of driving your lights.
6. The lights will FLASH THREE TIMES to show which mode the dimmer is in, then go off.
7. Turn the switch off. When you turn it on, the dimmer will continue to use the new mode.