Click below to print the data sheet for HC10
Further information:
Data Sheet
Product Code: HC10
Product Description: 1-Gang 1-Way V-Dim Rotary Fan Regulator 1 x 40-250W
Range: Essential
Finish: Mirror Chrome
Product Category: Halogen Dimmers
Insert/Knob Colour: Chrome Knob
Barcode: 5021575220117
Dimensions: 91x91x44mm
Faceplate Depth: 8mm
Net Weight: 148g
Gross Weight: 150g
Fixing Centres: 60.3mm
Depth from Mounting Face: 17.5mm
Recommended Back Box Depth: 25mm
Operating Voltage: 220/250V AC
Maximum Load Rating: 250W
Maximum Current Rating: 1.1A
Terminal (Live) Diameter: 3.2mm; Capacity: 3 x 1.5mm²
Terminal (Earth) Diameter: 3.3mm; Capacity: 3 x 1.5mm²
Product Features
V-Dim rotary speed control for ceiling fans
Rated 40-250W
Turn the dial to set the fan speed
Also dims any lighting on the same circuit
Bevel-edge faceplate, 8mm deep with chrome screws, fits a 25mm back box
Intended Applications: Indoor Use Only. Domestic lighting circuits. Do not use masking tape on any decorative products, or install on damp plaster.
Safety Advice: Not suitable for use with non-dimmable fluorescent bulbs and tubes, wire-wound or toroidal transformers or electric motors. This product's earth tag is fixed with a single rivet, a second rivet on the other screw hole is not required.. Do not overload. Product Must Be Earthed.
Applicable Safety Standard: BS 5518
Commodity Code: 85365007
All information is subject to change without notice. Errors and omissions excepted. Images are for illustrative purposes only. Individual features and colours may vary. Refer to date of issue to identify latest version.
Date of Issue: 11th November 2026 © Doyle & Tratt Products Ltd, Carylls Lea, Faygate, West Sussex, RH12 4SJ, United Kingdom. All rights reserved.