Click below to print the data sheet for XGM4
Further information:
Data Sheet
Product Code: XGM4
Product Description: 4-Gang 6A 1-Way Push-to-Make Momentary Switch (Twin Plate)
Range: Essential
Finish: Georgian Brass
Product Category: Retractive Switches
Insert/Knob Colour: Brass Buttons
Barcode: 5021575752182
Dimensions: 95x155x23mm
Faceplate Depth: 7mm
Net Weight: 230g
Gross Weight: 232g
Fixing Centres: 120.6mm
Depth from Mounting Face: 10.8mm
Recommended Back Box Depth: 16mm
Operating Voltage: 230v 50Hz
Maximum Load Rating: 6A
Maximum Current Rating: 6A
Terminal (Live) Diameter: 3mm; Capacity: 3 x 1.5mm²
Terminal (Earth) Diameter: 3.3mm; Capacity: 3 x 1.5mm²
Product Features
Momentary push to make switch that springs back when released
For blinds, doorbells and anything that needs a momentary signal rather than a permanent on
6A rated
Springs back when released
Bevel-edge faceplate, 7mm deep with brass screws, fits a 16mm back box
Intended Applications: Indoor Use Only. Domestic power supply. Do not use masking tape on any decorative products, or install on damp plaster.
Safety Advice: Product Must Be Earthed.
Applicable Safety Standard: BS EN 61058-1
Commodity Code: 85365011
All information is subject to change without notice. Errors and omissions excepted. Images are for illustrative purposes only. Individual features and colours may vary. Refer to date of issue to identify latest version.
Date of Issue: 11th November 2026 © Doyle & Tratt Products Ltd, Carylls Lea, Faygate, West Sussex, RH12 4SJ, United Kingdom. All rights reserved.