Click below to print the data sheet for XPM1
Further information:
Data Sheet
Product Code: XPM1
Product Description: 1-Gang 6A 1-Way Push-to-Make Momentary Switch
Range: Essential
Finish: Graphite 21
Product Category: Retractive Switches
Insert/Knob Colour: Iridium Button
Barcode: 5021575812152
Dimensions: 91x91x23mm
Faceplate Depth: 8mm
Net Weight: 106g
Gross Weight: 108g
Fixing Centres: 60.3mm
Depth from Mounting Face: 11.5mm
Recommended Back Box Depth: 16mm
Operating Voltage: 230v 50Hz
Maximum Load Rating: 6A
Maximum Current Rating: 6A
Terminal (Live) Diameter: 3mm; Capacity: 3 x 1.5mm²
Terminal (Earth) Diameter: 3.3mm; Capacity: 3 x 1.5mm²
Product Features
Momentary push to make switch that springs back when released
For blinds, doorbells and anything that needs a momentary signal rather than a permanent on
6A rated
Springs back when released
Bevel-edge faceplate, 8mm deep with black screws, fits a 16mm back box
Intended Applications: Indoor Use Only. Domestic power supply. Do not use masking tape on any decorative products, or install on damp plaster.
Safety Advice: Product Must Be Earthed.
Applicable Safety Standard: BS EN 61058-1
Commodity Code: 85365011
All information is subject to change without notice. Errors and omissions excepted. Images are for illustrative purposes only. Individual features and colours may vary. Refer to date of issue to identify latest version.
Date of Issue: 11th November 2026 © Doyle & Tratt Products Ltd, Carylls Lea, Faygate, West Sussex, RH12 4SJ, United Kingdom. All rights reserved.