Click below to print the data sheet for HT3
Further information:
Product Description: 1-Gang 2-Way V-Dim Push On/Off Rotary Dimmer 1 x 60-400W
Range: Essential
Finish: Brushed Steel
Product Category: Halogen Dimmers
Insert/Knob Colour: Brushed Steel Knob
Barcode: 5021575031591
Dimensions: 91x91x46mm
Faceplate Depth: 8mm
Net Weight: 146g
Gross Weight: 148g
Fixing Centres: 60.3mm
Depth from Mounting Face: 17.5mm
Recommended Back Box Depth: 25mm
Operating Voltage: 230v 50Hz
Maximum Load Rating: Halogen: 400W
Maximum Current Rating: 1.7A
Terminal (Live) Diameter: 3.2mm; Capacity: 3 x 1.5mm²
Terminal (Earth) Diameter: 3.3mm; Capacity: 3 x 1.5mm²
Product Features
V-Dim heavy duty dimming for incandescent lighting, including mains and low voltage halogen
Dims 60-400W of lighting; add up your lamp wattages to choose the right dimmer
Push on/off, rotate to dim; use in a 1-way circuit or in a 2-way circuit alongside a standard switch
Remembers your last brightness setting when switched back on
For dimmable LEDs choose the V-Pro range instead
Bevel-edge faceplate, 8mm deep with chrome screws, fits a 25mm back box
Intended Applications: Indoor Use Only. Domestic lighting circuits. Do not use masking tape on any decorative products, or install on damp plaster.
Safety Advice: Not suitable for use with non-dimmable fluorescent bulbs and tubes, wire-wound or toroidal transformers or electric motors. This product's earth tag is fixed with a single rivet, a second rivet on the other screw hole is not required.. Do not overload. Product Must Be Earthed.
Applicable Safety Standard: BS 5518
Commodity Code: 85365007
All information is subject to change without notice. Errors and omissions excepted. Images are for illustrative purposes only. Individual features and colours may vary. Refer to date of issue to identify latest version.
Date of Issue: 11th November 2026 © Doyle & Tratt Products Ltd, Carylls Lea, Faygate, West Sussex, RH12 4SJ, United Kingdom. All rights reserved.