Click below to print the data sheet for KCP102
Further information:
Product Description: 2-Gang 2-Way V-Com Push On/Off Rotary LED Dimmer 2 x 0-100W
Range: Essential
Finish: Mirror Chrome
Product Category: LED Dimmers
Insert/Knob Colour: Chrome Knob
Barcode: 5021575003994
Dimensions: 91x91x47mm
Faceplate Depth: 8mm
Net Weight: 156g
Gross Weight: 158g
Fixing Centres: 60.3mm
Depth from Mounting Face: 16.6mm
Recommended Back Box Depth: 25mm
Operating Voltage: 230v 50Hz
Maximum Load Rating: LED: 100W
Maximum Current Rating: 0A
Terminal (Live) Diameter: 3.2mm; Capacity: 3 x 1.5mm²
Terminal (Earth) Diameter: 3.3mm; Capacity: 4 x 1.5mm²
Product Features
V-Com intelligent leading edge (triac) dimming, our best-value intelligent dimmer for LED
Dims 0-100W of lighting per circuit with no maximum number of lamps
DRIVE function starts up lamps that will not switch on at low brightness
Adjustable minimum and maximum brightness to use the full range of your lamps
Choice of driving modes to suit any LED load
Soft start extends lamp life, with intelligent overload protection
Intended Applications: Indoor Use Only. Commercial & domestic lighting circuits including many dimmable LEDS. Do not use masking tape on any decorative products, or install on damp plaster.
Safety Advice: Not suitable for use with non-dimmable fluorescent bulbs and tubes, wire-wound or toroidal transformers or electric motors. This product's earth tag is fixed with a single rivet, a second rivet on the other screw hole is not required.. Do not overload. Product Must Be Earthed.
Applicable Safety Standard: BS EN 60669-2-1
Commodity Code: 85365005
All information is subject to change without notice. Errors and omissions excepted. Images are for illustrative purposes only. Individual features and colours may vary. Refer to date of issue to identify latest version.
Date of Issue: 11th November 2026 © Doyle & Tratt Products Ltd, Carylls Lea, Faygate, West Sussex, RH12 4SJ, United Kingdom. All rights reserved.