Data Sheet

Product Code: FQP1M1W

This product can also be made using our Matrix Syst

Range: White

Finish: White Plastic

Product Category: 1-10V Dimmers

Insert/Knob Colour: White Knob

Barcode: 5021575581942

Dimensions: 85x85x46mm

Faceplate Depth: 11mm

Net Weight: 116g

Gross Weight: 118g

Fixing Centres: 60.3mm

Depth from Mounting Face: 15.3mm

Recommended Back Box Depth: 25mm

Operating Voltage: 230v 50Hz (Switching), 1-10V (DC Dimming Control Signal)

Maximum Load Rating: 1500W (Switching) Up to 20 dimmable ballasts (Dimming Control Signal)

Maximum Current Rating: Switching: 6A; Dimming:20mA

Terminal (Live) Diameter: 3.2mm; Capacity: 3 x 1.5mm²

Intended Applications: Indoor Use Only. Domestic lighting circuits.

Safety Advice: For use with 1-1V ballasts/drivers only. Check the in-rush current for LED bulbs or drivers does not exceed 6A, and the rating on the control signal side of the ballast/driver does not exceed 2mA before connecting. Fit inrush current limiters where necessary. Do not overload. 

Applicable Safety Standard: BS EN 60669-2-1

Commodity Code: 85365015

Declaration of Conformity

Product Features

  1-10V dimmer for HF ballasts and LED drivers with a 1-10V DC control input

  Turn to dim, push to switch the mains on or off

  Dimming and switching are electrically isolated for consistent, reliable performance

  One dimmer can run one or several ballasts or drivers (up to 20mA control current, 6A mains load)

  Needs an additional two-core cable for the 1-10V side; full wiring diagram included

  Durable white plastic faceplate, 11mm deep, fits a 25mm back box

White Collection
The White range is the practical choice: a durable white plastic faceplate that suits any interior and any budget, with the same VARILIGHT dimming technology and build quality found across our decorative ranges.

White Plastic Finish
A durable white plastic faceplate with matching white rockers and dimmer knobs. A practical, easy-to-match finish for any room.