VARILIGHT V-Pro Multi-Point intelligent dimmer series
The simplest solution for 2-way dimming and more
The V-Pro Multi-Point range features Multi-Point dimming control, for the best control over your lighting from every location. This multi-way system will work with one master and an unlimited amount of supplementary controllers on one circuit (up to 50m of lighting cable).
- Multi-Point dimming control to dim from every location on the circuit
- Ideal for many dimmable LEDs
- Tactile touch dimming at every switch, with infrared remote control at a Remote master
- Programmable dimmers with a choice of dimming modes and an adjustable minimum brightness setting
- 100W
- 1 to 10 dimmable LEDs per gang
- Any number
- of supplementary controllers, up to 50m of cable from the master to the last
- 8
- minimum brightness settings to choose from
- 25mm
- minimum box depth for Classic (35mm for Ultraflat and Screwless)
- Dim from multiple switch points
- Proven V-Pro technology
- Silent dimming
- Control up to 100W of dimmable LED (max. 10 lamps)
- Fit one master and any number of supplementary controllers (up to 50m of cable)
- Masters and supplementary controllers available as separate purchases for maximum flexibility
- Link each position with three (or two) wires: LOAD, S-LINK and optional LIVE
- Choose a Multi-Point Remote master dimmer for enhanced control, including LightScene
- Simple up/down operation
- Grid module versions available
- Coordinates with VARILIGHT switches and sockets
Our V-Pro Multi-Point series comprises programmable intelligent dimmers with a choice of dimming modes for wider compatibility. All V-Pro Multi-Point dimmers offer superior dimming technology to deliver the best possible dimming performance for a given load.
To enhance compatibility with the ever-increasing range of lighting options now available to customers, V-Pro dimmers are programmable to offer a choice of dimming modes: trailing edge by default, with a leading-edge mode for loads that perform best with it. In addition, users can choose from 8 minimum brightness settings to optimise the dimming range of a particular lighting load.
Functionality
V-Pro Multi-Point dimmers are controlled using the tactile touch dimming control, and Remote masters also respond to an infrared remote. Remote control works at the master only: supplementary controllers are touch only, and programming is done at the master. Conventional switches can't be used on the circuit. The rectangular rocker touch pad allows you to have more control over the dimming cycle, while having a classic light switch design. Pressing anywhere on the touch pad will turn on/off, and pressing and holding the top will dim up and the bottom will dim down. You can change the driving modes and adjust the minimum brightness with presses of the touch pad.
Set up your dimmer Remote master instructions (PDF) Touch master instructions (PDF) Supplementary controller instructions (PDF)
We also have a range of push on/off rotary dimmers. Please see the V-Pro page for more information.
Suitable loads
V-Pro Multi-Point series dimmers are designed for use with LEDs and work with most dimmable LEDs on the market. They are also suitable for most dimmable electronic transformers. Please adhere to maximum rating listed on the datasheets or instruction leaflet.
For best results with low voltage lighting use VARILIGHT intelligent dimmer switches with VARILIGHT electronic transformers. Add up the VA ratings of the transformers, not the wattage of the bulbs, and keep within the maximum rating of the dimmer. VARILIGHT electronic transformers are suitable for controlling 12V a.c. rated LEDs (MR16) at half their rating. V-Pro dimmers are not suitable for wire-wound or toroidal transformers.
Check your LED lamps are suitable for dimmers that have a standby mode: a load regulator such as LEDFix may be needed.
For more information on compatibility, please refer to our dimmer compatibility guide.
LightScene
Unlock the scene-setting functionality in V-Pro Multi-Point Remote dimmers with the YRE8 LightScene remote control handset. This allows you to set up to 4 lighting scenes as well as control 4 circuits individually.
