Data Sheet

Product Code: EGJM1YV.MB

Product Description: 1-Gang V-Pro Multiway Dimmer 1 x 120W LED

Range: European VariGrid

Finish: Matt Black

Product Category: LED Dimmers

Insert/Knob Colour: Brass Knob

Barcode: 5021575042627

Dimensions: 71x71x57mm

Faceplate Depth: 4mm

Net Weight: 76g

Gross Weight: 78g

Fixing Centres: 60.3mm

Depth from Mounting Face:

Recommended Back Box Depth: Standard European 40mm Round or Square

Operating Voltage: 230v 50Hz

Maximum Load Rating: LED: 120W

Maximum Current Rating: 1.74A

Terminal (Live) Diameter: 3.2mm; Capacity: 3 x 1.5mm²

Terminal (Earth) Diameter: 3.3mm; Capacity: 3 x 1.5mm²

Intended Applications: Indoor Use Only. Domestic lighting circuits including many dimmable LEDs. Do not use masking tape on any decorative products, or install on damp plaster.

Safety Advice: Not suitable for use with non-dimmable fluorescent bulbs and tubes, TRIAC dimmable loads, wire-wound or toroidal transformers or electric motors. Do not overload. 

Applicable Safety Standard: BS EN 60669-2-1

Commodity Code: 85365005

Declaration of Conformity

Product Features

  V-Pro intelligent dimming, the industry standard for LED

  Dims 120W of lighting with no minimum load and no maximum number of lamps

  Rotary dimming from 2 or 3 switch locations with one or two companion controllers

  Simply replaces the existing switches, no additional wiring required

  Smooth, silent dimming with V-Pro technology on board

  Soft start brings the lights up gently, with intelligent overload protection

  Push on/off, rotate to dim; settings are saved even after a power cut

  Screwless low profile faceplate, just 4mm deep with no visible fixings, for standard 40mm round or square European wall boxes

European VariGrid Collection
The European VariGrid range lets you create your own combinations of switches, dimmers and sockets on a single screwless low profile faceplate. Made to fit standard round European wall boxes, simply pick a finish and add the modules you want, from Schuko and French sockets to rocker and toggle switches and V-Pro dimmers.

Matt Black Finish
The Matt Black finish is powder-coated to give a tactile, textured finish, which is tough, durable and resistant to fingerprints. Supplied with black socket inserts and iridium rockers.