Data Sheet

Product Code: JDIM101S

Product Description: 1-Gang V-Pro Multiway Dimmer 1 x 120W LED

Range: Screwless

Finish: Iridium

Product Category: LED Dimmers

Insert/Knob Colour: Iridium Knob

Barcode: 5021575014570

Dimensions: 86x86x48mm

Faceplate Depth: 4mm

Net Weight: 156g

Gross Weight: 158g

Fixing Centres: 60.3mm

Depth from Mounting Face: 23.6mm

Recommended Back Box Depth: 35mm

Operating Voltage: 230v 50Hz

Maximum Load Rating: LED: 120W

Maximum Current Rating: 0.4A

Terminal (Live) Diameter: 3.2mm; Capacity: 3 x 1.5mm²

Terminal (Earth) Diameter: 3.3mm; Capacity: 3 x 1.5mm²

Intended Applications: Indoor Use Only. Domestic electrical circuits. Do not use masking tape on any decorative products, or install on damp plaster.

Safety Advice: Not suitable for use with non-dimmable fluorescent bulbs and tubes, TRIAC dimmable loads, wire-wound or toroidal transformers or electric motors. 

Applicable Safety Standard: BS EN 60669-2-1

Commodity Code: 85365005

Declaration of Conformity

Product Features

  V-Pro intelligent dimming, the industry standard for LED

  Dims 120W of lighting with no minimum load and no maximum number of lamps

  Rotary dimming from 2 or 3 switch locations with one or two companion controllers

  Simply replaces the existing switches, no additional wiring required

  Smooth, silent dimming with V-Pro technology on board

  Soft start brings the lights up gently, with intelligent overload protection

  Push on/off, rotate to dim; settings are saved even after a power cut

  Screwless low profile faceplate, just 4mm deep with no visible fixings, fits a 35mm back box

Screwless Collection
Screwless Low Profile: minimalist design with clip-on faceplates and hidden fixings for a smooth, modern look.

Iridium Finish
The Iridium Black finish lends an air of sophistication and modernity with its deep, lustrous tone adding a touch of drama to stylish interiors. Supplied with black inserts and matching iridium rockers.