Data Sheet

Product Code: JEYM1.BC

---

Product Description: 1-Gang V-Pro Multiway Master Dimmer 1 x 100W LED

Range: European

Finish: Brushed Copper

Product Category: LED Dimmers

Insert/Knob Colour: Iridium Knob

Barcode: 5021575044379

---

Dimensions: 86x86x57mm

Faceplate Depth: 4mm

Net Weight: 106g

Gross Weight: 108g

Fixing Centres:

Depth from Mounting Face: 23.6mm

Recommended Back Box Depth: Standard European 40mm Round or Square

Operating Voltage: -

Maximum Load Rating: 230v 50Hz

Maximum Current Rating: 3.3mm

Terminal (Live) Diameter: 3 x 1.5mm²; Capacity:

Terminal (Earth) Diameter: 3 x 1.5mm²; Capacity: -

Intended Applications: BS EN 60669-2-1. Indoor Use Only

Safety Advice: Domestic lighting circuits including many dimmable LEDs. Do not use masking tape on any decorative products, or install on damp plaster.. Not suitable for use with non-dimmable fluorescent bulbs and tubes, TRIAC dimmable loads, wire-wound or toroidal transformers or electric motors This product's earth tag is fixed with a single rivet, a second rivet on the other screw hole is not required.. Do not overload.

Applicable Safety Standard: N/A

Commodity Code:

Declaration of Conformity

  Traditional rotary dimming with Multi-Way operation when used with Companion controllers

  Simplified programming system for easy setup, with adjustable minimum brightness setting and choice of driving modes

  Full dimming control from up to 3 dimmer locations