V-Pro dimmers are our flagship range, designed for modern LED lighting and built to deliver seamless, flicker-free dimming. V-Pro makes lighting control effortless and elegant.
Why choose V-Pro?
- Optimised for dimmable LEDs: no buzzing, no flickering
- Switch between dimming modes and fine-tune the brightness range
- Soft-start feature for a smoother fade and longer lamp life
- Push On/Off operation with smooth rotary dimming
- Settings are saved, even after a power cut
- Available in 120W or 300W LED with no minimum load
- 120W or 300W
- of dimmable LED per gang, no minimum load
- 3 modes
- trailing edge (default), simulated leading edge (not triac), alternative trailing edge
- 1 per circuit
- in 2-way circuits, an ordinary switch at the other end
- 25mm
- minimum box depth (35mm for Ultraflat and Screwless)
Loads and wiring
- Suitable for dimmable LED lighting and quality dimmable electronic low-voltage transformers.
- Not suitable for non-dimmable LED, fluorescent lamps or tubes, wire-wound or toroidal transformers, electric motors (e.g. fans) or triac dimmable drivers (use V-Com instead).
- For low-voltage lighting, count the transformer VA rating, not the bulb wattage, and match it closely to the lamp (e.g. 50 to 70VA for a 50W bulb).
- If overloaded, the dimmer switches itself off until the load is corrected.
- Three terminals per dimmer: C, L1 and L2. In 2-way circuits replace only one switch with a dimmer, to avoid flicker.
Product formats
- Available in 1 to 4 gang dimmer plates
- Choose from Classic, Screwless, Ultraflat, Urban, Vogue and more! See all decorative finishes
- Works with Varilight's PowerGrid system up to 12-Gang and other popular grid systems including MK, BG and Crabtree
Set-up, instructions and videos
