Data sheet: KDEP101.MB
Data sheet
KDEP101.MB 1-Gang 2-Way V-Com Push On/Off Rotary LED Dimmer 1 x 0-100W
Single V-Com Rotary 2-Way LED Dimmer 1 x 0-100W
Product features
- V-Com intelligent leading edge (triac) dimming, our best-value intelligent dimmer for LED
- Dims 0-100W of lighting with no maximum number of lamps
- DRIVE function starts up lamps that will not switch on at low brightness
- Adjustable minimum and maximum brightness to use the full range of your lamps
- Choice of driving modes to suit any LED load
- Soft start extends lamp life, with intelligent overload protection
- Push on/off, rotate to dim
- Low-profile faceplate, just 4mm deep with black screws, fits a 35mm back box
Product
- Product code
- KDEP101.MB
- Category
- V-Com Dimmer
- Range
- Essential
- Finish
- Matt Black
- Insert / knob colour
- Matt Black Knob
- Barcode
- 5021575024982
Size and fitting
- Dimensions
- 86x86x48mm
- Faceplate depth
- 4mm
- Fixing centres
- 60.3mm
- Depth from mounting face
- 22.1mm
- Recommended back box depth
- 35mm
- Net weight
- 146g
- Gross weight
- 148g
Electrical
- Operating voltage
- 230V 50Hz
- Maximum load rating
- LED: 100W (Max. 10 LEDs)
- Terminal (Live)
- 3.2mm, capacity 3 x 1.5mm²
- Terminal (Earth)
- 3.3mm, capacity 7 x 1.5mm²
Safety and compliance
- Intended applications
- Indoor Use Only. Commercial & domestic lighting circuits including many dimmable LEDS. Do not use masking tape on any decorative products, or install on damp plaster.
- Safety advice
- Not suitable for use with non-dimmable fluorescent bulbs and tubes, wire-wound or toroidal transformers or electric motors. Do not overload. Product Must Be Earthed.
- Applicable safety standard
- BS EN 60669-2-1
- Commodity code
- 85365005
Essential collection
The Essential Collection is the go-to range for unbeatable value. Its sleek, low-profile faceplate features clean lines that add a modern, refined touch to any space, while the visible fixing screws create a simple yet practical aesthetic. The Essential Collection delivers on both affordability and quality, making it the perfect solution for any interior.
Matt Black finish
The Matt Black finish is powder-coated to give a tactile, textured finish, which is tough, durable and resistant to fingerprints. It is offered with black plastic inserts and matching black screws.
All information is subject to change without notice. Errors and omissions excepted. Images are for illustrative purposes only. Individual features and colours may vary. Refer to date of issue to identify latest version.
Date of issue: 11th November 2026. © Doyle & Tratt Products Ltd, Carylls Lea, Faygate, West Sussex, RH12 4SJ, United Kingdom. All rights reserved.
Similar products
Other versions
Other finishes
You may also need
Recently viewed
Where to buy
Where to buy
Online
- Buy onlineCompare prices on Google Shopping (opens in a new tab)
- My Switch ShopEntire range, Gold Standard (opens in a new tab)
- TLC DirectEntire range, Gold Standard (opens in a new tab)
- VARILIGHT DirectBuy direct (opens in a new tab)
- ScrewfixSearch for KDEP101.MB (opens in a new tab)
- B&QSearch for KDEP101.MB (opens in a new tab)
- AmazonSelected products (opens in a new tab)
Not every shop stocks every product.
In a shop near you
Trade buying: wholesalers, or call 01293 223333International distributors


