Skip to content
VARILIGHT

Data sheet: KDEP102.MB

V-Com

Data sheet

KDEP102.MB 2-Gang 2-Way V-Com Push On/Off Rotary LED Dimmer 2 x 0-100W

Double V-Com Rotary 2-Way LED Dimmer 2 x 0-100W

Product features

  • V-Com intelligent leading edge (triac) dimming, our best-value intelligent dimmer for LED
  • Dims 0-100W of lighting per circuit with no maximum number of lamps
  • DRIVE function starts up lamps that will not switch on at low brightness
  • Adjustable minimum and maximum brightness to use the full range of your lamps
  • Choice of driving modes to suit any LED load
  • Soft start extends lamp life, with intelligent overload protection
  • Push on/off, rotate to dim
  • Low-profile faceplate, just 4mm deep with black screws, fits a 35mm back box

Product

Product code
KDEP102.MB
Category
V-Com Dimmer
Range
Essential
Finish
Matt Black
Insert / knob colour
Matt Black Knob
Barcode
5021575025019

Size and fitting

Dimensions
86x86x48mm
Faceplate depth
4mm
Fixing centres
60.3mm
Depth from mounting face
22.1mm
Recommended back box depth
35mm
Net weight
196g
Gross weight
198g

Electrical

Operating voltage
230V 50Hz
Maximum load rating
LED: 100W (Max. 10 LEDs)
Terminal (Live)
3.2mm, capacity 3 x 1.5mm²
Terminal (Earth)
3.3mm, capacity 8 x 1.5mm²

Safety and compliance

Intended applications
Indoor Use Only. Commercial & domestic lighting circuits including many dimmable LEDS. Do not use masking tape on any decorative products, or install on damp plaster.
Safety advice
Not suitable for use with non-dimmable fluorescent bulbs and tubes, wire-wound or toroidal transformers or electric motors. Do not overload. Product Must Be Earthed.
Applicable safety standard
BS EN 60669-2-1
Commodity code
85365005

Essential collection

The Essential Collection is the go-to range for unbeatable value. Its sleek, low-profile faceplate features clean lines that add a modern, refined touch to any space, while the visible fixing screws create a simple yet practical aesthetic. The Essential Collection delivers on both affordability and quality, making it the perfect solution for any interior.

Matt Black finish

The Matt Black finish is powder-coated to give a tactile, textured finish, which is tough, durable and resistant to fingerprints. It is offered with black plastic inserts and matching black screws.

All information is subject to change without notice. Errors and omissions excepted. Images are for illustrative purposes only. Individual features and colours may vary. Refer to date of issue to identify latest version.
Date of issue: 11th November 2026. © Doyle & Tratt Products Ltd, Carylls Lea, Faygate, West Sussex, RH12 4SJ, United Kingdom. All rights reserved.

Similar products

Other versions

You may also need

  • LEDFix: helps LED lamps dim smoothly

    YAGF LEDFix (for use in conjunction with some LEDs)

  • Replacement module for your V-Com dimmer

    MKP100 2-Way V-Com Push On/Off Rotary LED Dimmer 0-100W

Where to buy