Data Sheet
Product Code: KYP102.MB
This product can be made with our Matrix System
Product Description: 2-Gang 2-Way V-Com Push On/Off Rotary LED Dimmer 2 x 0-100W
Range: Urban
Finish: Matt Black
Product Category: LED Dimmers
Insert/Knob Colour: Matt Black Knob
Barcode: 5021575999822
Dimensions: 91x91x47mm
Faceplate Depth: 8mm
Net Weight: 156g
Gross Weight: 158g
Fixing Centres: 60.3mm
Depth from Mounting Face: 16.6mm
Recommended Back Box Depth: 25mm
Operating Voltage: 230v 50Hz
Maximum Load Rating: LED: 100W
Maximum Current Rating: 0A
Terminal (Live) Diameter: 3.2mm; Capacity: 3 x 1.5mm²
Terminal (Earth) Diameter: 3.3mm; Capacity: 4 x 1.5mm²
Intended Applications: Indoor Use Only. Commercial & domestic lighting circuits including many dimmable LEDS. Do not use masking tape on any decorative products, or install on damp plaster.
Safety Advice: Not suitable for use with non-dimmable fluorescent bulbs and tubes, wire-wound or toroidal transformers or electric motors. This product's earth tag is fixed with a single rivet, a second rivet on the other screw hole is not required.. Do not overload, not suitable for use with non-dimmable fluorescent bulbs and tubes, or electric motors. Product Must Be Earthed.
Applicable Safety Standard: BS EN 60669-2-1
Commodity Code: 85365005



Product Features
V-Com intelligent leading edge (triac) dimming, our best-value intelligent dimmer for LED
Dims 0-100W of lighting per circuit with no maximum number of lamps
DRIVE function starts up lamps that will not switch on at low brightness
Adjustable minimum and maximum brightness to use the full range of your lamps
Choice of driving modes to suit any LED load
Soft start extends lamp life, with intelligent overload protection
Push on/off, rotate to dim
Bevel-edge faceplate, 8mm deep with iridium screws, fits a 25mm back box
Urban Collection
The Varilight Urban range is a premium collection, inspired by the latest trends in interior design, bringing an Urban edge to stylish spaces. Each finish is presented on a contemporary bevel-edge plate style.
Matt Black Finish
The Matt Black finish is powder-coated to give a tactile, textured finish, which is tough, durable and resistant to fingerprints and is offered with black plastic inserts and matching black screws.
All information is subject to change without notice. Errors and omissions excepted. Images are for illustrative purposes only. Individual features and colours may vary. Refer to date of issue to identify latest version.
Date of Issue:
20th October 2026 © Doyle & Tratt Products Ltd, Carylls Lea, Faygate, West Sussex, RH12 4SJ, United Kingdom. All rights reserved.

















