Home
Ranges
Part M
JDLP401WS

Instruction leaflet PDF Additional instructions PDF Watch the video YouTube

Data sheet: JDLP401WS

1-Gang 2-Way V-Pro Push On/Off Rotary LED Dimmer 1 x 0-120W, Part M Black & White (JDLP401WS)

Data sheet

JDLP401WS 1-Gang 2-Way V-Pro Push On/Off Rotary LED Dimmer 1 x 0-120W

Name: 1-Gang 2-Way V-Pro Push On/Off Rotary LED Dimmer 1 x 0-120W
Brand: VARILIGHT
SKU: JDLP401WS

Single V-Pro Rotary 2-Way LED Dimmer 1 x 0-120W

Range Part M Finish Black-White

Product features

V-Pro intelligent dimming, the industry standard for LED
Dims 0-120W of lighting with no minimum load and no maximum number of lamps
Optimised for dimmable LEDs, no buzzing, no flickering
Silent trailing edge dimming that is gentle on the load
Soft start brings the lights up gently, with intelligent overload protection
Adjustable minimum brightness and a choice of driving modes to get the best from any LED
Push on/off, rotate to dim; settings are saved even after a power cut
High-contrast black faceplate, just 4mm deep with brass screws, fits a 35mm back box

Product

Product code: JDLP401WS
Category: LED Dimmers
Range: Part M
Finish: Black-White
Insert / knob colour: White Knob
Barcode: 5021575010619

Size and fitting

Dimensions: 86x86x48mm
Faceplate depth: 4mm
Fixing centres: 60.3mm
Depth from mounting face: 23.6mm
Recommended back box depth: 35mm
Net weight: 156g
Gross weight: 158g

Electrical

Operating voltage: 230V 50Hz
Maximum load rating: LED: 120W
Terminal (Live): 3.2mm, capacity 3 x 1.5mm²
Terminal (Earth): 3.3mm, capacity 3 x 1.5mm²

Safety and compliance

Intended applications: Indoor Use Only. Domestic lighting circuits including many dimmable LEDs. Do not use masking tape on any decorative products, or install on damp plaster.
Safety advice: Not suitable for use with non-dimmable fluorescent bulbs and tubes, TRIAC dimmable loads, wire-wound or toroidal transformers or electric motors. Do not overload. Product Must Be Earthed.
Applicable safety standard: BS EN 60669-2-1
Commodity code: 85365005

Declaration of Conformity

Part M collection

The Part M range offers high-contrast wiring accessories that help visually impaired users locate and operate switches and sockets more easily, supporting compliance with Part M of the Building Regulations. Each product pairs a black faceplate with contrasting white rockers and inserts, and extra large rockers are available on many of the switches for easier operation.

Black-White finish

A black faceplate with contrasting white rockers, inserts and dimmer knobs gives the high visual contrast recommended by Part M of the Building Regulations, helping visually impaired users find and operate switches and sockets.

All information is subject to change without notice. Errors and omissions excepted. Images are for illustrative purposes only. Individual features and colours may vary. Refer to date of issue to identify latest version.
Date of issue: 11th November 2026. © Doyle & Tratt Products Ltd, Carylls Lea, Faygate, West Sussex, RH12 4SJ, United Kingdom. All rights reserved.

You may also need

LEDFix: helps LED lamps dim smoothly
YAGF LEDFix (for use in conjunction with some LEDs)
Replacement module for your V-Pro dimmer
MJP120 2-Way V-Pro Push on Push off LED Replacement Dimmer Module Kit 1 x 0-120W

Where to buy

Online

Not every shop stocks every product.

In a shop near you

Trade buying: wholesalers, or call 01293 223333International distributors

Help with this product

Ask about this product 01293 223333, Mon to Fri, 9am to 5pm help@varilight.co.uk

Instruction leaflets Wiring diagrams Set up your dimmer Wall box depths FAQs